Fun Fabric Tray project

 

One of the items on my do not buy list is trays, but when I saw these old fiberglass trays I knew I had found what I've been looking for and  at just $3 each I had to get them. One of my first projects once home was the one in the back of my mind, just waiting for the right trays. It came out so nice I had to share it.

Start by painting the top of the tray white with spray paint, and let dry.

I put masking tape around the edge, to keep the paint only on the top of the tray. The reason for this is so the color(s) on the tray do not show through the fabric.

Once Dry, remove the tape and either apply spray adhesive or mod podge to the tray. Then align your fabric, and starting from the center begin to press it down moving outward,  avoid air bubbles as you go. Pay special attention to the curving edges, and pressing down on the top lip to get good contact. Paint over it again with mod podge on top of the fabric this time.  Allow the excess fabric to simply spill over and set aside to dry overnight.

Once Dry, use a sharp knife or razor to carefully cut away the excess fabric aligning it with the edge of the tray. Get as close as you can. Use an up and down motion to break the threads.

Then apply a second coat of mod podge, You can do this as many times as you'd like. I stopped at the 2nd coat. Allow it to dry overnight.

Note: The tray will probably not feel smooth to the touch. Fabric fibers tend to stand up when wet and they dry this way.  The tray will have a rough feel, but I don't mind this.  I was afraid to try and sand paper for fear of making it dirty.  Different fabrics may react differently.

The last step is to apply a coat of clear acrylic spray paint.  I do this because the mod podge will remain sticky and items you set on the tray will tend to stick to it.  The spray acrylic helps with this problem.

This process can be used for many projects.  How about clip boards, or luggage etc?  Use any fabric you like, old scarves, tea towels, clothing etc all work great.